WEBINAR GRATUITO

Saiba como criar um caso de negócio para a monitorização do estado das suas bombas submersas.

The role of thermal analysis in condition monitoring

Índice

What is thermal analysis?

Thermal analysis is an important monitorização do estado technique in which temperature sensors are used to determine the presence of a developing fault in a mechanical asset.

Temperature sensors range from simple thermocouples that measure the temperature at one location to infrared cameras that can capture the heat map for a whole area.

Thermocouples use the Seebeck effect: if two wires made of different metals are joined at one end, a change in temperature will produce a voltage across the other, unjoined, ends of the wires. Thermocouples come in different combinations of metals, each with its own temperature range. They also come in sheathed and unsheathed versions, depending on whether they’ll be exposed to corrosion, oxidation and other hazards.



Thermal cameras use Planck’s law: any object with a temperature above absolute zero emits infrared radiation, and the amount increases with temperature. (Infrared radiation is the same phenomenon as ordinary light—just at wavelengths outside our visible range. Radio waves and x-rays are other sections of this same electromagnetic spectrum.) Thermal cameras come in handheld and mounted types; for realtime insight, you’ll need them permanently installed. Accuracy can be affected by the camera’s focus and by how reflective the surfaces being filmed are, as well as air currents and the ambient temperature. Thermal cameras also need a source of power, either wired or from batteries.

The captured infrared signal is directly converted into a color map inside the camera. Each color in the image represents a different temperature. To identify fault-related changes over time, thermal analysis uses the techniques of computer vision, a field of machine learning focused on interpreting images.

How accurate is thermal analysis in detecting developing asset faults?

Below is a P-F curve demonstrating how thermal analysis compares to other técnicas de controlo do estado when it comes to fault detection in advance of an asset breakdown. This is a P-F curve for bearing failure in a specific production system.

pf curve bearing failure

As localizações das várias tecnologias na curva serão diferentes para cada peça de equipamento, ambiente de produção e modo de falha, por isso certifique-se de que a calcula para os activos e tipos de degradação específicos que pretende monitorizar.

How does thermal analysis compare to other condition monitoring techniques?

Download the condition monitoring comparison guide for a full comparison of thermal analysis and other major techniques.

 

Preencha o formulário para descarregar o livro eletrónico.

Mais de 30.000 profissionais de empresas industriais recebem os nossos conhecimentos e melhores práticas mensalmente ou trimestralmente.

Selecionar a lista para ver.